| Activity |
Value |
Explanation |
| Arming |
|
Arming:
Arming for Recording, Actions and Messaging:
Enable: activate all.
Off: deactivate all.
SI: arming controlled by signal input.
CS: arming controlled by custom signal as defined below.
From Master: copies Main Event Arming state from master camera.
Slave Mode: full arming slave mode.
. |
|---|
| |
|
Time Table Profile:
Time table profile for time-controlled arming. (Time Tables) |
|---|
Note: Configuring arming sources as From Master requires you to properly configure and enable
Master/Slave below.
|
Camera operates in full Arming Slave Mode!
Arming controls for Recording, Actions and Messaging/Messaging 2 are implicitly set to From Master.
|
| Custom Signals |
Value |
Explanation |
| Custom Signal 1 (CS1) |
|
Source:
Specify how to generate custom signal CS1.
Off: set to false.
Signal Input: derive from signal input.
Time Table: derive from time table.
From Master: copy CS1 from the master camera. |
|---|
| |
|
Signal Input:
Select one of the available signal inputs to use as source to CS1.
|
|---|
| |
|
Signal Input State:
Specify which signal input state switches CS1 to true. |
|---|
| |
|
Time Table:
Select the time table to use as input to CS1. |
|---|
| Custom Signal 2 (CS2) |
|
Source:
Specify how to generate custom signal CS2.
Off: set to false.
Signal Input: derive from signal input.
Time Table: derive from time table.
From Master: copy CS2 from the master camera. |
|---|
| |
|
Signal Input:
Select one of the available signal inputs to use as source to CS2.
|
|---|
| |
|
Signal Input State:
Specify which signal input state switches CS2 to true. |
|---|
| |
|
Time Table:
Select the time table to use as input to CS2. |
|---|
| Logically Combined Signal (CSL) |
|
Source:
Specify how to logically combine CS1 and CS2 in order to produce CSL.
And, Or: available logical combinations.
From Master: copy CSL from the master camera. |
|---|
Note: Configuring arming sources as From Master requires you to properly configure and enable
Master/Slave below.
|
| Master/Slave |
Value |
Explanation |
| Master/Slave |
|
Enable Master/Slave:
Specify whether or not this camera supports the processing of signals imported from a master camera and whether or not slave cameras are allowed to log in and to fetch local camera signals. |
|---|
| |
|
Master Camera:
Camera to fetch remote signals from. Only relevant if you specified From Master at least once as source to arming controls (camera main arming, recording, actions, messaging) or to custom signals (CS1, CS2, CSL). |
|---|
| |
|
Replication Protocol Port:
IP port used by the network protocol that replicates master camera signals among a set of slave cameras. |
|---|
Slave Information
Currently mastering no slave cameras.
Update Slave Information
(discards unset changes to this page)
|
| General Settings |
Value |
Explanation |
| Event LED Setup |
|
Flashing LEDs:
Controls LED flashing.
Set LEDs in LED Setup to Event for this feature. |
|---|
| |
|
Blinking LEDs:
Controls LED blinking.
Set LEDs in LED Setup to Event for this feature. |
|---|
| Arming Delay |
|
Arming Delay:
Delay of arming by signal input in seconds. |
|---|
| |
|
Disarming Delay:
Delay for disarming by signal input in seconds. |
|---|
|
|