MOBOTIX M10  M10-1-45-196 Event Settings

General Settings  Value  Explanation  Event Dead Time Event Dead Time: Event timeout [0..3600 s] while detection is suspended. Events  Value  Explanation  Passive Infrared Detector (PI)   PIR Enable: Motion detected by the infrared sensor.   PIR Level: Trigger level [0..100] Video Motion Window (VM)   Video Motion Enable: Motion detection using digital image analysis.   0,368,800,168,20,20,15 0,274,186,262,102,20,25 0,1044,250,82,202,20,25 Video Motion Definitions (VM): lens, x, y, width, height, sensitivity(0..99%), area(0..99%)[, max. area(0..99%)] Origin: lower left corner Lens: 0=right, 1=left     Dual Lens Video Motion Dual Lens Video Motion: Detects Video Motion events on both lenses. May reduce the frame rate.   Off On and hide on event On and highlight on event Hide but highlight on event Video Motion Style for Group 1: Appearance of motion window border.   Off 0.3 lux 0.6 lux 1.0 lux 1.8 lux 3.2 lux 5.6 lux Off 0.3 lux 0.6 lux 1.0 lux 1.8 lux 3.2 lux 5.6 lux Video Motion Night Mode: Dark Video Motion Suppress: Disables motion detection if illumination falls under selected value. Video Motion Window (VM2)   Video Motion Enable: Motion detection using digital image analysis.   0,140,330,200,300,20,25 0,940,330,200,300,20,25 Video Motion Definitions (VM2): lens, x, y, width, height, sensitivity(0..99%), area(0..99%)[, max. area(0..99%)] Origin: lower left corner Lens: 0=right, 1=left     Dual Lens Video Motion Dual Lens Video Motion: Detects Video Motion events on both lenses. May reduce the frame rate.   Off On and hide on event On and highlight on event Hide but highlight on event Video Motion Style for Group 2: Appearance of motion window border.   Off 0.3 lux 0.6 lux 1.0 lux 1.8 lux 3.2 lux 5.6 lux Off 0.3 lux 0.6 lux 1.0 lux 1.8 lux 3.2 lux 5.6 lux Video Motion Night Mode: Dark Video Motion Suppress: Disables motion detection if illumination falls under selected value. Microphone (MI)   Microphone Enable: Noise detection using the internal microphone.   Microphone Level: Trigger level [0..100]   50 ms 100 ms 150 ms 200 ms 250 ms 300 ms 400 ms 500 ms 750 ms 1000 ms 2000 ms Microphone Signal Width: Minimum duration of noises louder than trigger level. Signal Input (SI)   Signal Input: This event is triggered by an external signal (pin 9-5). Select Closed (low) to trigger when loop connected to Signal Input is closed or Open (high), when loop is opened.   Open (high) Closed (low) Rising (low to high) Falling (high to low) Change (Rising or Falling) Trigger Condition: Select kind of trigger.   De-Bounce Time: De-Bounce time for signal input in ms [100..2000 ms]. Second Signal Input (SI2)   Second Signal Input: This event is triggered by selected Signal Input Pin.   Signal Input (pin 9-5) CTS Signal (pin 8-5) DSR Signal (pin 6-5) RxD Signal (pin 2-5) Signal Input Pin: Select input pin for this event. (Requires Data/IO-Mode.)   Open (high) Closed (low) Rising (low to high) Falling (high to low) Change (Rising or Falling) Trigger Condition: Select kind of trigger.   De-Bounce Time: De-Bounce time for signal input in ms [100..2000 ms]. Third Signal Input (SI3)   Third Signal Input: This event is triggered by selected Signal Input Pin.   Signal Input (pin 9-5) CTS Signal (pin 8-5) DSR Signal (pin 6-5) RxD Signal (pin 2-5) Signal Input Pin: Select input pin for this event. (Requires Data/IO-Mode.)   Open (high) Closed (low) Rising (low to high) Falling (high to low) Change (Rising or Falling) Trigger Condition: Select kind of trigger.   De-Bounce Time: De-Bounce time for signal input in ms [100..2000 ms]. Fourth Signal Input (SI4)   Fourth Signal Input: This event is triggered by selected Signal Input Pin.   Signal Input (pin 9-5) CTS Signal (pin 8-5) DSR Signal (pin 6-5) RxD Signal (pin 2-5) Signal Input Pin: Select input pin for this event. (Requires Data/IO-Mode.)   Open (high) Closed (low) Rising (low to high) Falling (high to low) Change (Rising or Falling) Trigger Condition: Select kind of trigger.   De-Bounce Time: De-Bounce time for signal input in ms [100..2000 ms]. Periodic Event (PE)   Periodic Event Enable: Trigger an action periodcally every x seconds.   Seconds Milliseconds Hz Periodic Time Unit: Interval unit   Periodic Time Interval: Trigger interval [0..86400] in seconds, msec or Hz. Time Task (TT) Time Task: Trigger an event using a Time Task. User Click (UC) User Click: Triggers an event if the corresponding button on the camera's web site is clicked. Click here to trigger a User Click. Recording Begin (RB) Recording Begin: Trigger an event if Recording starts. Recording End (RE) Recording End: Trigger an event if Recording ends. Recording History (RH) Recording History: Trigger an event if Recording saves a history image. Recording Terminate (RT) Recording Terminate: Trigger an event if the Terminate Recording function has stopped Recording. Buttons (BT) Buttons Enable: Trigger an event by pressing the button(s) on the front panel.   Right Left Right OR left Right AND left Button Combination: Select button(s) to trigger on. IR Remote Control (IR)   Remote Control Enable: Trigger an event by signals from any IR remote control.   Any code Remote Control Code: IR code to receive for an event. IP Receive (RC) IP Receive Enable: Event on receiving a message over the network.   IP Receive Port: TCP port to listen on.   String Compare Regular Expression IP Receive Compare: Message match mode   IP Receive Message: Defines a message to wait for. Leave empty to trigger on any message.   Off Unformatted Add date & time Add client IP address Add timestamp and IP address Comment Text Forwarding: Enable forwarding of incoming and matching messages to comment text queue. COM In (CI) COM In Enable: Triggers an event when receiving a message from the serial interface. Set interface to Data > Terminal and Logger mode.   String Compare Regular Expression Binary Compare COM In Compare: Message match mode   COM In Message: Defines a message to wait for. Leave empty to trigger on any incoming message. Temperature (TP) Temperature Enable: Triggers an event if the temperature is higher/lower than the temperature value set below.   Internal Sensor Temperature Sensor: Select the temperature sensor.   Higher than Lower than Temperature Compare: Select the trigger condition.   Temperature Level: Enter the temperature. Precision is one decimal digit.   °C °F Temperature Unit: Select the temperature unit.   First Every Temperature Action: Start action(s): First: trigger only first time the condition is true. Every: trigger every time the condition is true. Illumination (IL) Illumination Enable: Triggers an event if the illumination is higher/lower than the illumination value set below.   Right Left Both Illumination Source: Select the camera sensor for illumination.   Higher than Lower than Illumination Compare: Select the trigger condition.   Illumination Level: Enter the illumination in lux. Precision is one decimal digit.   First Every Illumination Action: Start action(s): First: trigger only first time the condition is true. Every: trigger every time the condition is true. Random Event (RD) Random Event Enable: Activate random events. Random event is evaluated on every live image.   Events per Hour: Set random level in events per hour. Valid range from 0.0001 to 500.0000. Precision is up to four digits.